how long does a well pump last

How Long Does A Well Pump Last: Signs And Cost?

A Properly Sized Well Pump Should Last 8 to 10 Years. The average cost to replace or install a new well pump is typically between $1,000 and $2,750, with the national average being about $1,750.

Here are a few signs you should look for to replace your good pumps, and installation and replacement is a different costs. Continue reading, you will find the answer.

How Long Does a Well Pump Last?

A Properly Sized Well Pump Should Last 8 to 10 Years

Modern Well pumps should last for many years when installed by qualified professionals, but many homeowners find they lack the knowledge about the age and condition of their Well pump to determine whether it needs to be replaced.

A Well pump is a device that transports groundwater into a house. The pump is typically paired with a pressure tank, which balances the water pressure throughout the house and minimizes how frequently the pump needs to turn on and off. Your water pump may need to be replaced if there appears to be a problem with it. It might also indicate that your water system is experiencing other issues or that the pump is not the proper size. You can identify the issue’s root cause by getting in touch with qualified water system specialists like Skillings & Sons.

What are the Signs You Need a New Well Pump?

Your Well pump is crucial to ensuring that your house has a consistent supply of fresh, clean water. Although many homeowners report their pumps lasting much longer, frequently between 20 and 30 years, with proper Well maintenance, your Well pump can last, on average, 8 to 15 years!

But if you have a well at your house, you’ll probably need to replace the Well pump at some point. How will you know when it’s time? We’ll tell you the five indicators that a new well pump is necessary as well as what they might actually mean in order to help you!

You Have No Water at All

When you turn on a faucet or flush a toilet and absolutely no water comes out, something is definitely wrong. If the problems listed below can’t be resolved, you might need to have your Well pump repaired or replaced.

What it could be:

  • To ensure that the well has power, check your circuit breaker. To restart the pump, first, turn off the power to it and then reset the breaker.
  • The pressure tank, which stores water drawn from the well, has shut off and needs to be restarted.
  • Your yard will become flooded as a result of a plumbing malfunction, such as a pipe breaking, and your pump will start running constantly.
  • Your well is drying up due to drought, though this is unlikely unless the local climate has been exceptionally dry.

A Decrease in Water Pressure

If you notice a significant drop in your usual water pressure when you turn on the water, your pump is starting to fail and can no longer draw up as much water. It could also mean that your Well pump is inadequate, which could be brought on by the installation of a dishwasher, a new bathroom, or a bigger water heater.

What it could be:

  • The mechanisms or the pressure tank have a hole in them.
  • It’s possible that iron bacteria buildup in the pipes is causing low water pressure. If your water contains a lot of iron, this is typical. Check to see if the issue is present with all faucets; if not, it might be a localized issue.

Air is “Spitting” from the Faucet

The pump may not be able to lift Water up and maybe pull in the air if you turn on the faucet and notice air bubbles appearing to come through the pipes and inconsistent water flow. This is an indication that the pump is not operating effectively and may soon stop working entirely, similar to a drop in water pressure.

What it could be:

  • It’s possible that the pipe connecting the pump to your home has developed a crack, which a plumber or well pump repair expert can repair.
  • Your well is dry or the water table has fallen below the pump. If this is a recurring problem, it may indicate that the well needs to be dug deeper.

Your Well Water is Dirty

The presence of harmless minerals in your well will typically explain any metallic flavor or odor, as well as any egg-like odor. On the other hand, it must be fixed right away if the water is actually spewing out along with dirt, sand, or sediment. This is most likely a problem with the pump itself.

If the pump is pulling silt and dirt up from the bottom of your well because it is too big for it, you should replace it. If the pump’s filter screen has been torn or damaged in some other way, it might need to be repaired rather than moved if it was installed too deep in the well. A Well pump repair specialist can solve this issue.

Drinking cloudy, muddy, or dirty water is never a good idea until the problem is fixed and you have had your well water tested, regardless of what the problem may be, from harmless minerals to a broken well pump.

What it could be:

  • Your water system may become contaminated by broken water pipes.
  • The mineral deposits in your well may break down and cause sediment to enter your water if it has a high mineral content. Your well water will stay clean and fresh if you have a filtration system in place.
  • Only having hot water may indicate that the water heater is the source of the problem.
  • Recent heavy rains contaminated your well by washing surface water into it.
  • Your well may have become contaminated as a result of a septic system leak in a nearby property.

Your Well Pump Runs Constantly

An indication that your Well pump needs to be replaced or at the very least, repaired is if it is running continuously. The intake pipe needs to be primed if your jet pump system is above ground; this is typically due to a suction line leak. So, in order to create the suction required to draw water up and into the water line, water must be present in the jet system. If not, there may be a problem with the pressure control switch, a leak in the pipe, or a worn-out pump that cannot produce enough water pressure to activate the cut-off.

What it could be:

  • A decrease in the water table means that your well must work harder to maintain water flow into your home.
  • You have a plumbing leak, for example, if your faucet is seriously leaking or your toilet is running constantly.
how long does a well pump last

How Much Does Well Pump Installation and Replacement?

The average cost to replace or install a new well pump is typically between $1,000 and $2,750, with the national average being about $1,750. The unit cost and the installation cost can vary significantly depending on the type of Well pump you install or replace. The depth, location, and size of your well also have an impact on the overall cost.

Average Cost to Install a Well Pump

The price of installing a new well pump for your home will likely fall between $1,250 and $5,500, including installation. The size, type, location, depth, and size of your well, as well as the pump’s dimensions, all have a significant impact on this price.

By Type

The type of pump is one of the main determinants of how much it will cost to install a new well pump.

  • Submersible pumps are an affordable option costing between $200 and $1,200
  • Deep Jet pumps are a bit more expensive between $400 and $1,500
  • Shallow Jet pumps are a cheaper jet option between $300 and $1,000
  • Hand pumps are the cheapest option costing between $150 and $1,500
  • Solar pumps become more expensive between $1,500 and $6,500
  • Windmill Water pumps are the highest cost between $5,000 and $20,000
  • Constant Pressure pumps average between $2,000 and $5,000

Average Cost to Replace a Well Pump

Given that some Well pumps can be upgraded without being completely replaced, replacing a Well pump may be more affordable than outright purchasing a new one. A Well pump replacement will average from $250 to $5,000 with most homeowners reporting an estimated cost of $1,750.

What Affects the Cost of Well Pump Installation Or Replacement?

The price of installing a new well pump or changing an old one will depend on a number of factors. The size of the well is one of the most important considerations, but other factors to take into account include the type of pump, the depth of the well, and whether or not there are problems with the pressure tank in an existing system.

Well Size and Depth

The size and depth of the well are the two main factors that determine how much it will cost to install or replace a Well pump. Pumps installed in shallow wells require less work to install and can use more affordable “shallow” pumps, which are best suited for wells less than 25 feet deep. Wells up to 150 feet deep require the use of deep pumps, which are more expensive to install and purchase.

Type of Pump

Well pumps come in a variety of designs and sizes, and their costs, ease of installation, and efficacy vary.

Jet Pumps

Compared to more contemporary submersible pumps, jet pumps, an older style of Well pump, deliver less volume and pressure. Jet pumps are susceptible to “loss of prime” problems, meaning that the spinning impeller inside of the pump (which must be inside Water to develop enough lift to move) becomes air-bound. This problem is not present in contemporary submersible pumps because they are self-priming and submerged by design.

Submersible Pumps

Jet pumps have been replaced by submersible pumps, which are significantly more expensive. They are frequently constructed from cast iron, stainless steel, and occasionally thermoplastic. Due to the complete sealing of these pumps, homeowners can significantly reduce their repair and utility expenses. Although the initial cost may be high, these pumps can ultimately save both time and money. In addition to being generally quieter and more energy-efficient, they also produce pressure more quickly than jet pumps.

Constant-Pressure Pumps

Some of the most expensive types of Well pumps are those that operate at constant pressure. This is so that no matter how many faucets, toilets, or showers are operating simultaneously throughout your home, the water pressure will remain constant and even. This system is known as a variable frequency drive, or VFD. This clever system will ensure constant, even water pressure but is complicated and prone to expensive repairs.

Windmill Water Pumps

Although they can be expensive up front, windmill water pumps are a great option for people who live off the grid or in places where there are frequent power outages. Unless you already have a tower in place, these can be expensive to install. Tower installation alone can cost between $10,000 and $20,000, not to mention the cost of the windmill and its associated pump.

Solar Pumps

Solar pumps use the sun’s energy to power submersible or jet pumps, which is a great alternative for off-the-grid living. Unless you reside in an area with frequent inclement weather, which makes solar-driven utility less effective, pairing solar power with a high-end submersible model can be a great bet.

Hand Pumps

Nothing beats a traditional hand pump for true off-the-grid habitation. While pumping just enough water for one shower may exhaust you, you will never lose access to your well due to bad weather or utility problems. The least expensive option is the use of hand pumps.

Pressure Tank Issues

Most wells will pump water to a pressurized storage tank unless you live in a hilly area and can build your water storage tank above your home. If your water pressure is low, there might be a problem with your water storage tank instead of the pump at. Replacing this tank can cost anywhere from $750 to $4,000 depending on the capacity and type of pressurized tank.


How Long Do Well Pumps Last?

A Well pump should last approximately 15 years with regular maintenance. If the pump is not maintained properly or sustains damage, its lifespan will be reduced.

DIY Well Pump Installation Vs. Hiring a Professional?

Issues with well pumps are a good time to call a professional, even though we typically advise homeowners to pick up a wrench, hammer, or screwdriver and do their own home improvement. A specialist can quickly and safely identify a problem with your Well pump and point you in the direction of the right fix.

Electrical and plumbing problems are frequently involved in well pump repair. We strongly advise you to call a professional unless you are an experienced do-it-yourselfer because these are two complicated fields on their own. Most well pump specialists will have a derrick truck or puller machine to safely extract the pump if it needs to be removed.

Is It Worth It to Get a New Well Pump?

Depending on maintenance and the type of pump, a Well pump has an average lifespan of eight to fifteen years. If your current well pump has significant mechanical problems, it might be more cost-effective to purchase a new well pump than to invest a lot of money in repairs.

What’s the Best Type of Well Pump?

Since the majority of residential wells are no deeper than 25 feet, a shallow well jet pump is frequently an economical and adequate choice. A submersible pump, though more expensive, is sometimes necessary for deeper wells because of its superior efficiency and design. For off-the-grid options, well pumps can also be powered by solar panels, wind turbines, and human labor.

How Do I Know If My Well Pump is Broken?

A Well pump failure is indicated by a number of symptoms, including murky water, loud noises, erratic pressure, the air in your faucets, and unexpected increases in electricity costs.

What If My Well Pump is Relatively New, But Not Working Properly?

If you know your water pump is under five years old, and it is not working properly, it could be the wrong size. Have you recently increased your home’s water usage or did you recently expand a previously small home into a larger one? If so, the water pump might not be large enough to accommodate your family’s needs.

It also matters how powerful your water pump is. For information on horsepower, check your water pump’s identification plate or the documentation from the initial installation. The longer the pump lasts and runs, the less frequently it must operate.

Skillings & Sons’ water system experts can conduct a flow test to determine the number of gallons per minute leaving your well. Our large trucks serve as mobile warehouses that are fully stocked with everything we need to quickly replace your Well pump. The average American household requires a flow rate of 6 to 12 gallons per minute and 100 to 120 gallons per person per day. If the flow rate drops below the typical level, your Well pump might not be able to handle the workload.

If you suspect your water pump is getting old or isn’t powerful enough to properly supply your home, it is important to contact a water system professional for an evaluation. Another factor contributing to the issue could be inadequate piping, poor well water quality, or low pressure. Employing experts like Skillings & Sons can assist you in correctly identifying the cause and help you avoid wasting time and money on fixing the issue.