How To Change The Drill Bit? -Some Useful Skills

A drill bit is a tool we usually use when we install or decorate the house, but how to use it has always been a problem. So here are some simple ways we can study it.

Knowing how to change a drill bit is crucial because the drill is a tool that can assist us with many do-it-yourself projects.

One of the most popular tools used by people who need to work on plaster, pipes, wood, metals, and other surfaces is the drill. Numerous tasks require a drill, including carpentry, remodeling, plumbing, and woodworking.

However, a lot of beginners struggle when it comes to swapping out these bits on the drill. You can advance in your job by making sure you are aware of the precise procedures for changing a drill bit.

How To Change A Drill Bit Step By Step

Loosen The Chuck

There is a device called a drill chuck that holds the bit. And it needs to be loosened in order to swap out the existing bit for a new one. To accomplish this, simply counterclockwise rotate the chuck and vigorously unwind it with your fingers until the old bit comes out.

Don’t forget to squeeze the trigger as you hold the chuck, too. Once finished, this will release the drill bit from the chuck’s jaws.

Remove The Drill Bit

You can see the bit wobble once you loosen the chuck. Do not dare to hold it with your fingers if you have just used it because it will be extremely hot.

Protect your finger in this situation by wearing gloves or something similar. When the temperature is low enough, hold it up in the air if you can.

Take The New Bit And Insert It

Now select the correct size bit to put in the drill. Once you’ve chosen the appropriate one, insert the bit’s smooth side into the drill’s chuck jaw. The smooth area is actually inside the chuck jaws.

The bit should be inserted into the chuck and pulled out toward you after the smooth portion of the bit has been inserted into the chuck’s jaws. The pullback shouldn’t be longer than one centimeter.

Pull The Trigger

You’ve got to pull the trigger a few times to get it back in place. To accomplish this, squeeze the trigger for 1-3 seconds while holding the chuck in your other hand. This will make the bit easier to keep in place. The ability to install the bit straight is another benefit of holding the bit and the chuck.

Check If There Is A Self-locking Chuck Mechanism

Drill rigs from certain manufacturers come with a self-locking mechanism. To make the bit even more resilient in this situation, you must work on the ratchet mechanism. You must firmly turn the ratchet on the bit’s shank to obtain this ratchet mechanism.

It will be in its proper location once you hear the click. It must be turned firmly next to the chuck in order to activate the ratchet mechanism. A clockwise rotation is required for this twist.

Once you know how to use the drill, your job will be so quick and convenient! Come and decorate your house!

Type of Drill Bits for Wood	What is used for
1. Twist drill bits	Combining it with a manual drill is how you use it. These drills enable drilling holes with very little tool rotation.
2. Spade drill bits	It enables installation in a standard drill while offering a large drilling diameter. The wood grain is not torn, and this type cuts clean edges.
3. Three-point drill bits	Typically constructed of chrome-vanadium steel, they are most frequently used for drilling wood. Designed to work with all kinds of wood: hard, soft, plywood, chipboard, etc.
4. Forstner drill bits	Forstner bits and artificial bits are wood drilling tools used to create large blind holes, such as those needed to drill knotholes and hold hidden hinges.

Once you know how to use the drill, your job will be so quick and convenient! Come and decorate your house！