Hang Curtains

How To Hang Curtains Without Drilling? – Ideas And Examples

You might want to add curtains to your space without making holes in the walls if you rent your home or have recently painted or wallpapered walls. You can hang curtains with the help of these no-drill curtain ideas without harming your walls or woodwork. There are a surprisingly large number of methods for hanging apartment-friendly curtains without installing a rod, including Command Hooks, S-hooks, magnets, and more. With these ideas for hanging curtains without drilling, your new window treatments can block light and add style and personality to your space, all while saving your walls.

What Are Curtain Rods?

When installed in your home, a curtain rod is a horizontal pole or piece of hardware from which you can hang drapes or curtains.

To fit different home improvement budgets while still enhancing the interior design, there are various types of curtain rods and drapery options. For the purpose of positioning the curtain rod, some curtain designs, for instance, might have grommet holes near the top of the curtain. Other drapery types may use curtain rings or curtain hooks to fasten to the rod.

When To Hang Curtain Rods Without Drilling Holes

Sometimes it’s a personal preference to hang curtains without making holes in them, and other times the circumstance demands it. Here are a few scenarios in which hanging a curtain rod without the use of nails, drywall anchors, or screws could be your only option:

  • Inadequate space around the window frame: You may need to mount the curtain rod inside the window frame in its place if your hardware would extend past the window trim or frame on either side of the window. You might be able to hang the curtain rod from the ceiling directly over the top of the window. Your best option for privacy or light control may be to make your own curtains for other difficult window orientations or large living room windows where window treatments are impractical.
  • Installation of lightweight curtains: If you are not installing heavy curtains, blackout curtains, or thick decorative curtains, you might be able to secure your drapery with a more passive solution. There are several varieties of curtains or valance options that are light enough to be fastened with tension rods or adhesive strips rather than a drill.
  • Inability to drill curtain rod brackets: If you’re a renter, even tiny holes in the drywall for the installation of tiebacks or curtains could infuriate your landlord. In that case, using damage-free alternatives like adhesive strips, removable adhesive hooks, or non-intrusive rod designs might be advantageous. It might be less complicated to hang a ceiling curtain from ceiling hooks in structures that use shiplap and plaster rather than conventional drywall.

How To Hang Curtains Without Drilling

To hang curtains using a damage-free installation method, try one of these options:

  1. Secure the hardware with adhesive hooks. You can buy adhesive hooks and adhesive strips in a range of sizes and tensile strengths. Hook holding capacities range from four to twenty pounds per hook. The ease of removal and low risk of wall damage make using adhesive hooks to hang curtains and other items advantageous for renters. The elastic substance will simply release from the surface by pulling on the bottom of the adhesive strip.
  2. Use magnetic curtain rods. If you are hanging something on a metal door or window frame, then this is your only option. To start the magnetic connection, these metal frames must contain ferrous metals that contain iron. The majority of magnetic rods are made for lightweight curtains, but you can spend more money on stronger magnets to hang heavy drapes.
  3. Use tension rod curtains inside window frames. These shower curtain rods without a rod pocket are especially fond of this style. When hanging separate curtain panels for windows, you can apply the same ideas. Place the tension rod at the correct height after measuring the curtain’s length with a tape measure. To ensure that the rod touches the trim perpendicularly, make sure it is level and plumb. Twist the rod to extend it, and each end will press against the interior of the window frame without endangering it. Twenty to forty pounds of hanging weight can typically be supported by the tension rod design.

Different Kinds Of Curtains

Command Hooks

Although the company also produces hooks specifically for curtains, Sticky Command Hooks work well as coat hangers. They don’t require drilling because their bottom hook, which is slimmer and more rounded, fits most curtain rods or wooden dowels. The Command Hooks can be removed when it’s time to move without leaving any sticky residue behind, which is the best part.

Macrame Curtains

These homemade macrame curtains will be a dreamy addition to your space if you’re looking to give your window or doorway a little casual-chic energy. If your ceiling permits it, you could also use an additional rope to tie the curtains up in addition to hanging them from a tension rod or beam. With no holes or wall damage, they’ll add style and block the light.

Hang Curtains

DIY Magnetic Curtain

If you have a metal door or window frame, creating a DIY magnetic curtain is an easy and stylish way to block obtrusive morning or evening light. However, if you already have curtains or drapes that you love, it’s not difficult to add a few magnets so you can hang the curtains with this technique. In this case, the curtain project is created from scratch by sewing round magnets into the geometric-printed fabric.

DIY No-drill Privacy Screen

This privacy screen functions as curtains without needing to be hung, making it ideal for bathrooms or smaller kitchen windows. The screen will simply pop into place without any hardware (or wall holes) needed once you’ve built the panel and taken the proper measurements. However, you’ll need to be somewhat familiar with woodworking.

Dowels And Sticky Hooks

The most elegantly understated method of hanging curtains is with a thin wooden dowel. This area has a beachy, airy vibe thanks to the dowels resting on white, sticky Command Hooks. A pro tip is to wait at least an hour for the hooks to fully set into the wall before hanging anything on them. The advantage of using a sticky hook over drilling holes in the wall is that you can move the rod and hooks if you decide the curtains are too low or high without causing any damage.

Outdoor Curtains Hung With S-hooks

These lovely, light-filled outdoor curtains are actually hung with S-hooks. The hook’s opposite end is curled to fit the specially shaped PVC pipe rod and one side is looped into the ceiling panes. A tension or shower rod could be used to replicate this look. Lighter materials, like these lovely sheer gauzy curtains, are best suited for this DIY project because it looks polished and sophisticated.

Upholstery Tack Curtains

These upholstery tacks are a clever way to hang curtains if you don’t mind making a few small holes in your walls but don’t like the way bulky curtain rods look. Just keep in mind that while these look classy and drape beautifully, they are more for decoration since you won’t be able to open and close the curtains once they are tacked. Even though you might still need to do some light patching after removing the tacks from the wall, the damage won’t be as severe as holes from drilling.

Because they provide privacy and let you adjust the lighting in your house, curtains are a crucial component of home design.

It can be challenging to hang curtains without causing damage to problematic walls or in apartments.

To determine which solution is best for your living spaces, take into account each of these options. After all, you shouldn’t have to decide between using curtains and causing damage to your walls.

You can have curtains and spotless walls if you are creative and innovative enough.